National Aerospace Standards Co - Electrical Connector Parts inventory by page 3

Displaying Page 3 of 14

Part No	Description	Part Type	QTY	RFQ
LM4839MTBD	board evaluation lm4839mt	other connectorss	Avl	RFQ
781077-01	extra 18-pos connectors for ni wsn-3212. 1 top entry 1 side entry	rf and wireless test equipment	Avl	RFQ
NAS1653REV2	connector,plug,electrical	NA	Avl	RFQ
LP3996SD-3030EV	board evaluation lp3996sd-3030	other connectorss	Avl	RFQ
CLINK3V48BT	board eval for ds90cr485 486	other connectorss	Avl	RFQ
NI-PXI-2586-10-Channel-12-A-SPST-Form-A-Relays	the national instruments pxi-2586 is a high-power, general-purpose switch in a single-slot, 3u pxi module. it has 10 independent spst (form a) relays with low contact resistance and high isolation voltage. the ni pxi-2586, rated for both high currents (up to 12 a) and high voltages (up to 300 vdc/300 vac), is ideal for switching power signals and loads in control applications and battery, power supply, and automotive testing.	switching and control test equ	Avl	RFQ
LM4888SQBD	board evaluation lm4888sq	other connectorss	Avl	RFQ
LM3686TL-AADWEV	board eval for lm3686	other connectorss	Avl	RFQ
196375-01	ni 9971 backshell for 2-pos connector block (qty 4)	rf and wireless test equipment	Avl	RFQ
NAS356-81-1050	connecting link,rigid	NA	Avl	RFQ
LM3671TL-1 8EV	board evaluation lm3671tl-1.8	other connectorss	Avl	RFQ
LMH730121	board eval for lm34919 sw reg	other connectorss	Avl	RFQ
BLVDS04	board eval ds92lv1023/1224	other connectorss	Avl	RFQ
NAS1286-6	link,chain,connecting	NA	Avl	RFQ
DAC122S085EBNOPB	board evaluation dac122s085	other connectorss	Avl	RFQ
NAS1650R22B41SN	connector,receptacle,electrical	NA	Avl	RFQ
LM2743EVAL	board evaluation lm2743	other connectorss	Avl	RFQ
NI-SCXI-1163R-32-Channel-Optically-Isolated-Solid-State-Relay-Switch	the national instruments scxi-1163r includes 32 normally open, or form a, optically isolated solid-state relays, arranged into eight banks of four relays with one common pole for each bank. you can use the ni scxi-1163r to switch high-voltage loads, up to 240 vac/vdc and up to 200 ma. you can easily integrate scxi-1163r modules into existing scxi systems without additional daq devices or cabling. for similar functionality in pxi, consider the ni pxi-2576 which provides 16 banks of 4x1 (2-wire) multiplexers at a cheaper cost per relay.	switching and control test equ	Avl	RFQ
K1F-00002-561	electromechanical relay dpdt 10a 120vac plug in/socket	other connectors	Avl	RFQ
MS27488-20	plug,end seal,electrical connect	NA	Avl	RFQ
NAS1650R22B55SN	connector,receptacle,electrical	NA	Avl	RFQ
WAVEVSNBRD4 4	board interface digital hi spd	other connectorss	Avl	RFQ
LME49860NABD	board evaluation lme49860na	other connectorss	Avl	RFQ
NAS552-4D	connector,multiple,fluid pressur	NA	Avl	RFQ
ADC10321EVAL	board evaluation for adc10321	other connectorss	Avl	RFQ
NI-PXI-2595-5-GHz-4x1-Multiplexer	the national instruments pxi-2595 is a 4x1 high-frequency unterminated multiplexing switch capable of switching signals from dc to 5 ghz. the characteristic impedance of the channels on this module is 50 +. the pxi-2595 has a maximum voltage rating of 30 vrms with a maximum switching current of 500 ma. it is well suited for applications that require the routing of high-frequency signals inside automated test equipment (ate) systems because it can switch signals with very low insertion loss. in addition, the excellent voltage standing-wave ratio (vswr) and isolation parameters make this module the perfect choice in any system geared towards high-frequency applications. the pxi-2595 also offers relay count tracking to help reduce unexpected system downtime.	rf and wireless test equipment	Avl	RFQ
779047-01	daqpad-6015 for usb, screw-terminal connectors, us (120 v)	data acquisition systems and e	Avl	RFQ
777080-01	electromechanical relay,8 spdt without cable	switching and control test equ	Avl	RFQ
776947-02	gpib connector, covers female, quantity 4	miscellaneous test and measure	Avl	RFQ
LMX25312220EVAL	board evaluation lmx25312220	other connectorss	Avl	RFQ
777687-30	scxi-1330 32-pin connector and shell assembly	signal conditioning equipment	Avl	RFQ
NAS1694G16T24PN	connector,plug,electrical	NA	Avl	RFQ
NAS359-64-390	connecting link,rigid	NA	Avl	RFQ
K1F-00010-761	electromechanical relay dpdt 10a 120vac plug in/socket	other connectors	Avl	RFQ
777722-03	sc-2345 (panelettes, side conn, 7 to 42 vdc, supply not incl)	signal conditioning equipment	Avl	RFQ
SD202EVK	board evaluation lmh0202	other connectorss	Avl	RFQ
LM3402EVAL	board evaluation for lm3402	other connectorss	Avl	RFQ
ADC14155LFEB	board eval for adc14155lf	other connectorss	Avl	RFQ
DS25BR150EVKNOPB	board evaluation ds25br150	other connectorss	Avl	RFQ
Q1T-00300-341	electromechanical relay spdt 8a 120vac 120vdc surface mount	other connectors	Avl	RFQ
LM4857ITLBD	board evaluation lm4857itl	other connectorss	Avl	RFQ
777081-01	electromechanical relay,16 spdt without cable	switching and control test equ	Avl	RFQ
K1K-00060-661	electromechanical relay dpdt 10a 120vac plug in/socket	other connectors	Avl	RFQ
FP-RLY-420	the fp-rly-420 has 8 spst relays for switching general-purpose signals and loads. the fp-rly-420 module installs onto a universal terminal base, which supplies either screw or spring terminals for field i/o wiring. the terminal base also buses module power from the network module, and communicates status and control between the fp-rly-420 module and the network module.	switching and control test equ	Avl	RFQ
551012922	board eval univ for sc-70 amp	other connectorss	Avl	RFQ
780540-01	reference clock t connector	sound and vibration measuremen	Avl	RFQ
777600-01	right angle pwb mounting with 68-pin male connector	miscellaneous test and measure	Avl	RFQ
LM5034EVAL	board evaluation lm5034	other connectorss	Avl	RFQ
K1F-00005	electromechanical relay dpdt 10a 120vac plug in/socket	other connectors	Avl	RFQ
NAS1641R12T12S6	connector,receptacle,electrical	NA	Avl	RFQ
NAS553-5	connector,multiple,fluid pressur	NA	Avl	RFQ
MHW-SOIC20NOPB	adapter debug/ice mstr 20-soic	other connectorss	Avl	RFQ
K1K-00002-661	electromechanical relay dpdt 10a 120vac plug in/socket	other connectors	Avl	RFQ
LM3670MF-1 5EV	board evaluation lm3670mf-1.5	other connectorss	Avl	RFQ
LP38511TS-1 8EV	board eval for lp38511ts-1.8	other connectorss	Avl	RFQ
LM49250RLEVAL	board eval w/lm49250rl	other connectorss	Avl	RFQ
ADC14DS105KARBNOPB	board eval for adc14ds105karb	other connectorss	Avl	RFQ
NAS552-5	connector,multiple,fluid pressur	NA	Avl	RFQ
ADC10030EVAL	board evaluation for adc10030	other connectorss	Avl	RFQ
LMH2180TMEVAL	board eval for lmh2180tm	other connectorss	Avl	RFQ
551600075-001	board for soic lmh6612/19	other connectorss	Avl	RFQ
LM2745-19AEVAL	board evaluation lm2745-19a	other connectorss	Avl	RFQ
LMX25311312EVAL	board eval for lmx25311312	other connectorss	Avl	RFQ
197546-01	cable assy, 68 pos vhdci conn to eight 9 pos d-sub, rs 485, 1m	switching and control test equ	Avl	RFQ
777145-01	cb-68lp low-cost, unshielded i/o connector block	data acquisition systems and e	Avl	RFQ
NI-PCI-6520-8-Mechanical-Relay-Outputs-8-Ch-Ch-Isolated-Digital-Inputs	the ni pci-6520 is an industrial digital i/o board with eight ¦60 vdc or 30 vrms relay outputs with maximum switching power of 60 w and eight ¦30 vdc, channel-to-channel isolated digital inputs with industry-standard 24 v logic levels. the digital inputs offer connectivity to both sinking and sourcing signals. for added reliability, the pci-6520 features watchdog timers to recover from a variety of computer and application faults. it also features programmable power-up states, digital filtering, and change detection for optimal control over your application. the board offers a standard 37-pin d-sub connector for connectivity to a wide range of low-cost accessories, and it takes advantage of ni-daqmx measurement services software, which helps you achieve shorter setup times and added productivity.	data acquisition systems and e	Avl	RFQ
NI-9505-Full-H-Bridge-Brushed-DC-Servo-Drive-Module	the ni 9505 module is a full h-bridge servo motor drive for direct connectivity to actuators such as fractional horsepower brushed dc servo motors, relays, lamps, solenoids, and valves. with its low power consumption and small size, combined with the reconfigurability and performance of the field-programmable gate array (fpga), you can create intelligent, energy-efficient control systems using the ni labview graphical system design platform. the ni 9505 delivers continuous current of up to 5 a at 40 ¦c (or 1 a at 70 ¦c) at 30 v. to increase the output power of the module, national instruments offers an additional screw-terminal accessory you can use in place of the standard screw terminal included with the ni 9505 module. with the ni 9931 screw-terminal accessory, the ni 9505 can deliver a maximum current of 7.3 a at 40 ¦c (or 1 a at 70 ¦c). the ni 9505 benefits electronics engineers designing consumer appliances, industrial control engineers designing small- to medium-sized machines, and automotive engineers working on rapid prototyping applications.	switching and control test equ	Avl	RFQ
779105-01	ni 9936 10-pos screw term connector block (qty 10)	data acquisition systems and e	Avl	RFQ
NI-USB-6525-8-Solid-State-Relays-8-DI-Counter-Ch-to-Ch-Isolated	the ni usb-6525 is a bus-powered usb device with eight normally open solid-state relay outputs featuring 60 vdc/30 vrms switching voltage and 500 ma/ch maximum switching current. the solid-state relay outputs are ideal for controlling pumps, valves, motors, and various other industrial actuators. the usb-6525 also features eight ¦60 vdc channel-to-channel isolated digital inputs to read from industrial digital sensors. you can use one of the digital input channels as a 5 khz, 32-bit counter for counting digital pulses and measuring frequency and pulse widths. isolated channels break ground loops and offer protection from noise and spikes on external signals. for added ease of use and reliability, the usb-6525 features built-in screw terminals and strain relief. industrial feature set ni industrial digital i/o devices offer a set of high-reliability features designed to automate even the most demanding applications. programmable power-up states provide safe operation when connected to pumps, valves, motors, and relays. digital i/o watchdog timers detect computer or application crashes and ensure safe recovery. change detection triggers your application and performs a read operation after a digital event with minimal processor usage. programmable input filters eliminate glitches/spikes and remove noise. driver software the usb-6525 works with ni-daqmx driver software, which features an easy-to-use and intuitive interface for programming. the device, which is compatible with ni labview, ni labwindowsö/cvi, ansi c/c++, c#, visual basic .net, and visual basic 6.0, works with windows and labview real-time oss. the mark labwindows is used under a license from microsoft corporation. windows is a registered trademark of microsoft corporation in the united states and other countries.	data acquisition systems and e	Avl	RFQ
CP3-TB-BT26	board target for cp3bt26	other connectorss	Avl	RFQ
LM1770EVAL	board evaluation lm1770	other connectorss	Avl	RFQ
777508-01	bnc-2095 32-channel bnc connector	signal conditioning equipment	Avl	RFQ
776290-908	ssr backplane, 8-channel without cable	miscellaneous test and measure	Avl	RFQ
NAS359-61-390	connecting link,rigid	NA	Avl	RFQ
LMK02000EVAL-1	board eval with 245.76 vcxo	other connectorss	Avl	RFQ
LM4852LQBD	board evaluation lm4852lq	other connectorss	Avl	RFQ
NI-9481-4-Channel-Relay 30-VDC-2-A 60-VDC-1-A 250-VAC-2	the national instruments ni 9481 is a 4-channel, single-pole single throw (spst) sourcing digital output module for any ni compactdaq or compactrio chassis. each channel provides access to an electromechanical relay for switching signals up to 30 vdc (2 a), 60 vdc (1 a), 250 vac (2 a) signals and features 250 vrms channel-to-channel isolation. each channel also has an led that indicates the state of that channel. the ni 9481 allows for direct connection to a wide array of industrial devices such as motors, actuators, and dc devices.	data acquisition systems and e	Avl	RFQ
LM4899ITLBD	board evaluation lm4899itl	other connectorss	Avl	RFQ
LM26EVAL-TPA	board evaluation lm26cim5-tpa	other connectorss	Avl	RFQ
LM4953SDBD	board evaluation lm4953sd	other connectorss	Avl	RFQ
NI-SCXI-1166-High-Current-General-Purpose-Relay-Switch	the national instruments scxi-1166 is a general-purpose switch module with 32 channels. it has independent spdt (form c) nonlatching relays with very low on-resistance and low thermal offset. the ni scxi-1166 can switch up to 2 a at 30 vac/30 vdc and can carry 5 a per channel. hence, it is ideal for switching, routing, and controlling high-current signals. each relay channel has a normally closed (nc), normally open (no), and common (com) terminal.	signal conditioning equipment	Avl	RFQ
SPUSI2NOPB	board eval data capture board	other connectorss	Avl	RFQ
LM34910EVAL	board evaluation lm34910	other connectorss	Avl	RFQ
777141-01	tbx-68 unshielded, i/o connector block with din-rail mounting	data acquisition systems and e	Avl	RFQ
LM25085AMYEEVAL	lm25085amyeeval - eval board 42v constant on-time pfet buck switching controller	other connectors	Avl	RFQ
LP5900SD-1 8EV	board evaluation lp5900sd-1.8	other connectorss	Avl	RFQ
COP8-EMA-20SO	cable converter dip to soic	other connectorss	Avl	RFQ
MS33687-24-10P	insert,electrical connector	NA	Avl	RFQ
NAS356-64-2638	connecting link,rigid	NA	Avl	RFQ
K1K-00300-662	electromechanical relay dpdt 10a 24vdc plug in/socket	other connectors	Avl	RFQ