Owned and operated by leading aviation and electronics distribution company, ASAP Semiconductor, the team here at Purchasing Synergy has access to over six billion parts in its inventory, including connector Signal Conditioning Equipment part types like the board to board headers and receptacles for female sockets. Among our inventory, we carry SCXI-1163R, NI-TBX-24F, NI-SCXI-1194-2 5-GHz-50-Quad-4x1-Mux-Insertion-Loss-1 35-d, NI-SCXI-1175-196-Channel-Multiplexer-Switch-Module, NI-SCXI-1167-64-Channel-External-Relay-Driver-Module and others manufactured from National Aerospace Standards Co. We pair our supply of quality inventory with dedicated account managers that can provide custom solutions to the needs of our customers, such as a need for Signal Conditioning Equipment parts or obsolete Parts. As an FAA AC 0056B accredited and ISO 9001:2015 certified company, we have earned our reputation for reliability, and are the only independent distributor with a No China Sourcing pledge. Ready to get started? Then send out an Instant RFQ (Request for Quote) today.
| Part No | Description | Manufacturer | QTY | RFQ |
|---|---|---|---|---|
| SCXI-1163R | The SCXI-1163R includes 32 normally open, or Form A, optically isolated solid-state relays, arranged into eight banks of four relays with one common pole for each bank. You can use the SCXI-1163R to switch high-voltage loads, up to 240 VAC/VDC and up to 200 mA. The SCXI-1163R is programmed serially over the SCXIbus. You can therefore easily integrate SCXI-1163R modules into existing SCXI systems without additional DAQ devices or cabling. The modules can operate in parallel mode when cabled directly to a plug-in DIO device. | national aerospace standards co | Avl | RFQ |
| NI-TBX-24F | The TBX-24F is a general-purpose screw terminal block with feed-through connections for 24 signal lines. You connect the TBX-24F to the SCXI module with discrete wires connected to a standard SCXI terminal block. For example, you can use two TBX-24F blocks to terminate the I/O lines for a single SCXI-1160 relay module, which requires 48 signal connections (16 relays, 3 lines per relay). You individually wire the TBX-24F to a standard SCXI-1324 terminal block, which attaches directly to the front of the SCXI-1160 module. | national aerospace standards co | Avl | RFQ |
| NI-SCXI-1194-2 5-GHz-50-Quad-4x1-Mux-Insertion-Loss-1 35-d | The National Instruments SCXI-1194 is a quad 4x1 high-frequency unterminated multiplexing switch capable of switching signals from DC to 2.5 GHz. The characteristic impedance of the channels on this module is 50 ┘. The NI SCXI-1194 has a maximum voltage rating of 30 Vrms with a maximum switching current of 500 mA. It is well-suited for applications that require the routing of high-frequency signals inside automated test equipment (ATE) systems because it can switch signals with very low insertion loss. In addition, the excellent voltage standing-wave ratio (VSWR) and isolation parameters make this module the perfect choice in any system geared toward high-frequency applications. The SCXI-1194 also offers relay count tracking to help reduce unexpected system downtime. Note: The bandwidth specification of a switch module is not an absolute specification and is determined by vendor standards. Although you can route higher-frequency signals through this switch module, they encounter more degradation than those at lower frequencies. To determine the best switch module for your application, review the insertion loss, VSWR, and isolation specifications of the product for the bandwidth of your application. For more information on choosing the right RF switch for your application, review the Guide to Selecting an RF Switch under the Resources tab. | national aerospace standards co | Avl | RFQ |
| NI-SCXI-1175-196-Channel-Multiplexer-Switch-Module | The National Instruments SCXI-1175 is a high-density multiplexer switch module. With 196 1-wire channels or 98 2-wire channels, the NI SCXI-1175 is capable of routing hundreds of signals to measurement devices or from source units. Each channel uses robust electromechanical relays and is capable of switching up to 100 VDC/100 VAC or 1 A. With a scanning speed of up to 140 channels/s, the SCXI-1175 acts as an excellent front-end for high-channel-count automated test applications. | national aerospace standards co | Avl | RFQ |
| NI-SCXI-1167-64-Channel-External-Relay-Driver-Module | The National Instruments SCXI-1167 is a 64-channel external relay driver, capable of providing up to 50 V or 600 mA of drive capacity (with an external supply). The relay driver is the ideal choice when the current and voltage requirements for relays exceed those found in existing relay modules (or for relays embedded in a test system). The NI SCXI-1167 includes overcurrent, overvoltage, and flyback protection to ensure long-life operation. The SCXI-1167 can also drive small DC motors or other inductive relay coils. | national aerospace standards co | Avl | RFQ |
| NI-SCXI-1166-High-Current-General-Purpose-Relay-Switch | The National Instruments SCXI-1166 is a general-purpose switch module with 32 channels. It has independent SPDT (Form C) nonlatching relays with very low on-resistance and low thermal offset. The NI SCXI-1166 can switch up to 2 A at 30 VAC/30 VDC and can carry 5 A per channel. Hence, it is ideal for switching, routing, and controlling high-current signals. Each relay channel has a normally closed (NC), normally open (NO), and common (COM) terminal. | national aerospace standards co | Avl | RFQ |
| NI-SCXI-1161-General-Purpose-Relay-Module | The National Instruments SCXI-1161 is a general-purpose switching module consisting of eight independent SPDT (also called Form C) nonlatching relays. They can switch up to 8 A at 125 Vrms, 6 A at 250 Vrms, or 5 A at 30 VDC, making them suitable for higher power applications. Each channel has a normally closed (NC), normally open (NO), and common (COM) terminal. You can use two or more NI SCXI-1161s (and SCXI-1160s) in the same chassis with a single DAQ device or switch controller. The DAQ device controls these SCXI modules through serial communication over the SCXIbus in the backplane of an SCXI chassis. The NI 4021 switch controller or the NI 40470/4060 DMMs control these SCXI modules via the SCXI-1362 cable assembly. | national aerospace standards co | Avl | RFQ |
| NI-SCXI-1160-16-Channel-General-Purpose-Relay-Module | The National Instruments SCXI-1160 is a general-purpose switching module consisting of 16 independent SPDT (also called Form C) latching relays with very low on-resistance and low thermal offset. With power capabilities of up to 2 A at 250 Vrms or 30 VDC, these relays are suitable for switching, routing, and controlling medium-level signals. Each channel has a normally closed (NC), normally open (NO), and common (COM) terminal. You can use two or more SCXI-1160s (and SCXI-1161s) in the same chassis with a single DAQ device or switch controller. The DAQ device controls these SCXI modules through serial communication over the SCXIbus in the backplane of an SCXI chassis. The NI 4021 switch controller or the NI 4070/4060 DMMs control these SCXI modules via the SCXI-1362 cable assembly. | national aerospace standards co | Avl | RFQ |
| NI-SCXI-1128-High-Voltage-FET-Multiplexer Matrix-Switch | The National Instruments SCXI-1128 is a high-density FET switch module that can act as a multiplexer or matrix. As a multiplexer, the NI SCXI-1128 can operate in different multiplexing modes including 1-wire for large-channel-count systems, 2-wire for differential pair systems, or 3 and 4-wire modes for resistive measurements including RTDs and thermistor. With SCXI front-mounting terminal blocks, the SCXI-1128 becomes an 64x1 1-wire matrix, 32x1 2-wire matrix, 4x8 2-wire matrix, or 16x1 4-wire matrix. | national aerospace standards co | Avl | RFQ |
| NI-SCXI-1127-High-Voltage-Electromechanical-Relay-Mux Matrix-Switch | The National Instruments SCXI-1127 is a 32-channel (2-wire) high-density armature relay module that can act as a multiplexer or matrix switch. As a multiplexer, the NI SCXI-1127 can operate in different modes including 1-wire for large-channel-count systems, 2-wire for differential pair systems, or 3 and 4-wire modes for resistive measurements including RTDs and thermistors. With SCXI front-mounting terminal blocks, the SCXI-1127 becomes an 64x1 1-wire multiplexer, 32x1 2-wire multiplexer, 16x1 4-wire multiplexer, or 4x8 2-wire matrix. Expand the measurement power of your digital multimeter (DMM), or build a complete ATE switching system for all of your instruments, with one or more of these modules. | national aerospace standards co | Avl | RFQ |
| 778018-03 | SC-2345 (panelettes, rear conn, 7 to 42 VDC, supply not incl) | national aerospace standards co | Avl | RFQ |
| 778018-02 | SC-2345 (panelettes, rear conn,universal AC,supply incl)Not/Japan | national aerospace standards co | Avl | RFQ |
| 778018-01 | SC-2345 (panelettes, rear conn, power from DAQ device) | national aerospace standards co | Avl | RFQ |
| 777722-03 | SC-2345 (panelettes, side conn, 7 to 42 VDC, supply not incl) | national aerospace standards co | Avl | RFQ |
| 777722-02 | SC-2345 (panelettes, side conn,universal AC,supply incl)Not/Japan | national aerospace standards co | Avl | RFQ |
| 777687-30 | SCXI-1330 32-Pin Connector and Shell Assembly | national aerospace standards co | Avl | RFQ |
| 777687-10 | SCXI-1310 96-Pin Connector and Shell Assembly | national aerospace standards co | Avl | RFQ |
| 777509-01 | TC-2095 32-Channel Thermocouple Connector | national aerospace standards co | Avl | RFQ |
| 777508-01 | BNC-2095 32-Channel BNC Connector | national aerospace standards co | Avl | RFQ |
| 777264-01 | TBX-96 DIN-Rail Mountable Connector Blocks | national aerospace standards co | Avl | RFQ |
| 187585-03 | 6-Pin LEMO (Female) Connector Panel | national aerospace standards co | Avl | RFQ |
| 184738-03 | 9-Pin (Female), D-SUB Connector Panel for CA-1000 | national aerospace standards co | Avl | RFQ |
| 184721-01 | Strain Relief Connector Panelette for the CA-1000 Style Enclosure | national aerospace standards co | Avl | RFQ |
| 184483-01 | Blank Connector Panelette for the CA-1000 Style Enclosure | national aerospace standards co | Avl | RFQ |
Low Price Warrantied inventory at competitive prices
Find it fast Search the world's largest inventory of electronic components by manufacturer, category or part number
Quality guaranteed We sell only warrantied and traceable parts
Get it fast All inventory ready to ship from our sellers
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote